CQMS Razer Conveyor accessories Archives -

CQMS Razer design and manufacture a broad range of conveyor accessories for a variety of conveyor applications. Our products are designed to maximise performance whilst minimising ongoing maintenance requirements, helping to deliver the lowest cost of ownership possible.

Safeguard

The CQMS Razer Roller Barrier offers a low-cost, passive safety system where the operation of overhead conveyors poses an ongoing potential safety risk.

CQMS Razer Track

CQMS Razer Track belt trackers are a custom built design to suit the individual needs of the conveyor belt and application. The CQMS Razer Track belt tracker designs incorporate both Return and Trough trackers with varying Roller configurations. The CQMS Razer Track belt tracker helps eliminate belt tracking issues on virtually any conveyor belt application. Each CQMS Razer Track belt tracker utilises existing site rollers and a serviceable bearing unit to help keep ongoing maintenance requirements to a minimum.
Available in 3 duty applications – Standard Duty, Heavy Duty and Extra Heavy Duty.

CQMS Razer Tunnel Track

The CQMS Razer Tunnel Track belt tracker is suited to applications where conveyor belt tracking poses an ongoing issue to conveyor belt performance. By deforming the conveyor belt, the CQMS Razer Tunnel Track belt tracker forces the conveyor belt to maintain the desired position. Best suited for short centered and reversing conveyors where belt tracking can cause problems with conveyor belt reliability.

Hot Cast Polyurethane lagging

CQMSRazer Hot Cast Polyurethane lagging offers an ultra-long life product especially suited to new and OEM pulley applications. Polyurethane is cast onto the pulley surface which results in a finish that has superior abrasion resistance, increased material shedding capabilities and an extremely strong bond with the pulley shell. CQMSRazer Hot Cast Polyurethane lagging offers a cost effective alternative for all non-drive pulley applications where extension of service life and lowest cost of ownership is of the highest priority.
CQMSRazer Hot Cast Polyurethane lagging is also available in an Industry certified FRAS compound for use in Underground applications.

Polyurethane strip lagging

Suitable for all non-drive pulleys where service life is a critical factor, CQMSRazer Polyurethane strip lagging offers an average 500% increase in service life over CQMSRazer Rubber lagging. A combination of highly abrasive resistant polyurethane bonded to a neoprene backing rubber, CQMSRazer Polyurethane strip lagging delivers maximum service life while reducing both initial and ongoing maintenance costs.

FRAS Rubber strip lagging

CQMS Razer FRAS Rubber strip lagging is a high-quality synthetic rubber product. All CQMS Razer FRAS Rubber strip lagging is designed to increase conveyor belt performance by eliminating conveyor belt slip, increasing water shedding capability and extending pulley shell wear common in un-lagged pulleys. CQMS Razer FRAS Rubber strip lagging provides for cost-effective workshop and field application for virtually any drive or non-drive pulley application.

Natural Rubber strip lagging

CQMS Razer Natural Rubber strip lagging is a high-quality synthetic rubber product utilising our 2 polymer construction process. All CQMSRazer Natural Rubber strip lagging is designed to increase conveyor belt performance by eliminating conveyor belt slip, increasing water shedding capability and extending pulley shell wear common in unlagged pulleys. CQMS Razer Natural Rubber strip lagging provides for cost-effective workshop and field application for virtually any drive or non-drive pulley application.

Ceramic strip lagging

Where prevention of conveyor belt slip, prolonged lagging service life, and increased drive efficiency are key considerations, CQMSRazer Ceramic strip logging can provide the solution. A combination of aluminum oxide ceramic tiles and high-quality synthetic rubber, CQMSRazer Ceramic strip lagging is available to suit any conveyor belt pulley application.

SureClamp

CQMSRazer offers a range of conveyor Skirting systems for various conveyor belt applications. CQMSRazer Skirting systems are modular, easy to install and maintain and offer extended service life via all our stainless steel construction.

CQMS Razer Dual Stabilising Roller

An extension of the CQMS Razer Single Stabilising Roller assembly, the CQMS Razer Dual Stabilising Roller assembly provides conveyor belt stability from both above and below the conveyor belt. Specifically designed for conveyor belt cleaner systems where secondary and tertiary conveyor belt cleaners cannot be installed close to a pulley or where severe belt harmonics exist, the Dual Stabilising Roller assembly allows for optimal conveyor belt cleaner performance in areas where conveyor belt stability would otherwise reduce conveyor belt cleaner efficiency.

CQMS Razer Single Stabilising Roller

CQMS Razer’s Single Stabilising Roller assembly is used to improve overall conveyor belt cleaner system performance by increasing conveyor belt stability and maintaining tip to conveyor belt contact. CQMS Razer’s Single Stabilising Roller assembly can be retrofitted into existing conveyor belt or designed in prior to manufacture. CQMS Razer’s Single Stabilising Roller assembly is designed to allow for existing onsite rollers to be utilised thus reducing the requirements for non-standard rollers.

Spray bar systems

Spray Bar Systems allow for upgrading of existing conveyor belt cleaner systems from dry to wet with minimal capital outlay. Utilising the universal mounting bracket system, quick installation is achieved with minimal conveyor belt downtime.

Water control box

Water Control Boxes integrate the requirement for spray water control with the additional protection of a stainless steel enclosure. With the operational components protected from the extremes of environmental and mechanical damage, the Water Control Box allows for easy integration of water sprays into any conveyor belt cleaning system.

Water control manifold

Water Control Manifolds are designed to complement Spray Series conveyor belt cleaners and Conveyor Spray Bar systems. Available in bypass and inline models, the Water Control Manifold allows for easy integration of water sprays into any conveyor belt cleaning system.

Razer Diagonal Ploughs

Where access to a conveyor belt is limited or material is to be shed to one side of the conveyor belt the CQMS Razer Diagonal Plough is best suited for these applications. CQMSRazer Diagonal Ploughs are available in single and reversing models for any conveyor belt application.

CQMS Razer Failsafe Vee Ploughs

Providing constant protection against material entering the tail and take-up pulleys the CQMS Razer Failsafe Vee Plough is specifically designed for conveyor belts with higher operating speeds. The CQMS Razer Failsafe offers a self-adjusting plough with a dual pole mounting configuration to help eliminate plough vibration usually associated with increased belt speed. The CQMS Razer Failsafe plough geometry integrates nose dive prevention into the design and comes standard with a safety chain for added protection.

CQMS Razer Vee Ploughs

CQMS Razer Vee Ploughs provide constant protection against fugitive materials from entering into tail and take-up pulleys. CQMS Razer Vee Ploughs use gravity to maintain constant conveyor belt contact whilst long life polyurethane blades reduce servicing requirements to a minimum.

CQMS Razer You Series

Specifically designed to effect greater conveyor belt cleaner performance at the centre of the conveyor belt, the CQMS Razer You Series is best suited to conveyor belts which have a greater wear profile through the centre of the conveyor belt. The conveyor belt cleaner blade profile removes a greater proportion of fine carry back from the worn area of theconveyor belt where other conveyor belt cleaner variants style may have a tendency to pass over thus leaving the finest of particles in place.

CQMS Razer R Series Spray Pole

CQMS Razer R Series Spray Pole conveyor belt cleaner combines the benefits of the R Series conveyor belt with water sprays to increase cleaner system efficiency by 3-4 times when compared with dry conveyor cleaner systems. The R Series Spray Pole conveyor belt cleaner is primarily used in applications where the conveyor belt is either designed to reverse as part of normal operation or has the ability to reverse in relation to the cleaner tips. Typical installations include on conveyor belt shuttles, conveyor belt tripper head pulleys and reversing conveyors.

CQMS Razer R Series Tungsten

The CQMS Razer R Series Tungsten secondary conveyor belt cleaner is designed to situate behind the pulley where the conveyor belt is most stable. The CQMS Razer R Series Tungsten conveyor belt cleaner is primarily used on applications where the conveyor belt is either designed to reverse as part of normal operation or has the ability to reverse in relation to the cleaner tips. Typical installations include on conveyor belt shuttles,conveyor belt tripper head pulleys and reversing conveyors.
Also available in a Super-pole configuration.

CQMS Razer P Series Spray Pole

The CQMS Razer P-Series Spray Pole conveyor belt cleaners combine a proven conveyor belt cleaner design with water sprays to increase conveyor belt cleaner system efficiency by 3-4 times when compared with dry conveyor belt cleaner systems. The water sprays assist conveyor belt cleaner performance in two ways, firstly blasting carried back material from the conveyor belt surface whilst placing the remaining fine particle carry back into a water suspension for removal by the conveyor belt cleaner tips. Secondly, the addition of water acts as a lubricant for the cleaner tips, extending their service life and minimising wear to the conveyor belt cover.

CQMS Razer P Series Tungsten

The CQMS Razer P Series Tungsten secondary conveyor belt cleaner is designed to situate behind the pulley where the conveyor belt is most stable. Used in conjunction with a CQMS Razer primary conveyor belt cleaner, the P Series conveyor belt cleaner’s main function is a removal of residual fine product which has passed through the primary conveyor belt cleaner. CQMS Razer P Series Tungsten conveyor belt cleaners can be installed in tandem to provide optimal cleaner system efficiency or used in conjunction with water sprays for the ultimate in conveyor belt cleaner performance.
Also available in a Super-pole configuration.

Razer skalper

A sturdy primary cleaner with low initial & ongoing maintenance costs. The Razer skalper cleaner offers self tensioning adjustment with fast blade change out for maximum on-site serviceability.

RAZER H SERIES ECONOCLEANER

An all-round primary conveyor belt cleaner for applications where mechanical fasteners or excessive conveyor belt cover damage exists. All CQMSRazer H Series Polyurethane conveyor belt cleaners are supplied with a spring adjuster system for continued self-adjustment between services.

CQMS Razer H Series E-Type Polyurethane

A variation on the CQMS Razer H Series Polyurethane conveyor belt where cost-effectiveness and conveyor belt cleaner performance come together. The CQMS Razer H Series E-Typeconveyor belt is designed to reduce capital outlay and ongoing maintenance costs while not compromising on conveyor belt cleaner performance.

CQMS Razer H Series Super-pole

The CQMS Razer H Series Super-pole is a primary conveyor belt cleaner specifically designed for large conveyor belt width high speed, high tonnage conveyor belt systems where a robust conveyor belt cleaner design is paramount.

CQMS Razer H Series Tungsten

The CQMS Razer H Series Tungsten primary conveyor belt cleaner is suitable for vulcanised conveyor belt applications where a combination of high-performance cleaning and low maintenance conveyor belt cleaning solution is required. The CQMS Razer H-Series Tungsten conveyor belt cleaner removes up to 80% of carryback materials left on the conveyor belt after product discharge.